Welcome to Advanced Moisture Control, Inc.

Concrete moisture vapor emission & alkalinity control solutions and high-performance, moisture-proof epoxy floors



    We produce epoxy-based concrete moisture mitigation products that are cost-effective, ecologically sound and proven to work.


    Cost versus risk, is paramount to every project. Therefore, we have developed warranted treatments that yield the lowest installed cost per square foot. 


    Our Vapor-Green® concrete moisture sealers meet or exceed ASTM F-3010-13 standard practice for two-component resin based, membrane-forming moisture mitigation systems, yet can be applied with without the need for heavy blasting profiles that yield low spread rates and require additional time and materials for finishing.


    Our products have been used to seal millions of square feet across America in wide variety of applications from medical, institutional, educational, commercial and retail projects where time, cost and effectiveness are all major concerns. We offer a warranty for up to 15 years.


    Experience with solving moisture problems is just as critical as the product. Our staff and network of applicators have long resumes of direct involvement both on the project and in the classroom. We do not merely sell a great product, we provide an understanding of the issue and how to minimize risk.


    If you a building owner, architect, specifier or contractor who is seeking outstanding technical support, we are at your service.  


    Moisture vapor-proof, high performance epoxy flooring systems

    Our experience with moisture control solutions has lead to the development of our Vapor-CLEAR moisture-proof epoxy floor coatings.

    We off a very tough, durable and decorative synthetic polymer floor system usable in a wide variety of finished floor applications, indoors or out, providing aesthetic excellence.

    Vapor-CLEAR will not be affected by any amount of concrete slab moisture as it is formulated to be semi-permeable, elastomeic and highly chemically-resistant.

    With all the same performance characteristics as expensive high build epoxy floor coatings, Vapor-CLEAR is modern, cost-effective, eco-friendly alternative the old conventional high-mil thickness epoxy.

    Our polymer formulations can be applied directly to diamond ground and hydro blasted surfaces, unlike our competitors who require heavy mechanical profiling and a lot of material to build back-up the smoothness of the floor.

    Vapor-CLEAR has a compressive strength that is over twice that of most concrete, so using the hardnes of the slab with a flat, smooth, even diamond ground surface means far less product is needed to provide a tough floor. That means saving money and the enviornment.

    Our products are far easier to apply than our competitors', as we have long working times and no dangerous solvent evaporation during the wet-application process. Our products are installed in working buildings, with no odor problems.

    With up to 250 different color options, Vapor-CLEAR is a highly cost effective synthetic polymer flooring system that is applied over diamond-profiled slabs, offering high spread rates and lower cost per square foot than conventional epoxy floors.

    No moisture testing is required. Warranted not to bubble, blister or peel due to concrete slab moisture for 5 years when properly installed by certified applicators.


    Certified applicator installations

    While we are more than just a material supplier, we do take an active interest in every project, since our name is on it.


    Therefore, we only provide our moisture-control systems to certified applicators who share the same commitment to solving problems as we do.


    Our warranty is jointly signed by our certified applicator, providing our customers the assuance that their treatment was prescribed and executed correctly.


    Advanced Moisture Control has certified applicators in most large metropolitian areas across the mainland USA and Hawai'i.


    Please contact us directly for more info about our excellent team of certified applicators in your area.






Ecologically safe...

and safe for people to be around too.


The above photo is from a working hospital that used one side of the hallway staying in operation while the other side was being treated and re-floored, without exposing occupants to harmful vapors.


A chemical product for concrete moisture control must be capable of reducing vapor emission to acceptable levels, remain bonded permanently to the slab, resist the high alkaline environment of concrete, and to allow the subsequent bonding of other materials such as cements, floor coverings or polymer coatings to its surface.

In addition, a chemical product should be environmentally safe as well as user-friendly during the application.

Our products are water reducible, meaning that they can be diluted and cleaned up with water if spilled and are not classified as a marine pollutant.


Our products do not have components that could bring toxic, caustic, corrosive or flammable exposure to applicators who are  installing them or to the other occupants of buildings.

Our products are Green by way of their manufacturing standards, made in the USA, meet all VOC requirements but are also non-toxic during the application process.

Please see our products page for information about environmental credits.

Got any questions?

Our product data sheets have all the performance parameters listed in them.


If you have specific questions about our products, application, certified installers or just want to know something about concrete slab moisture, we are glad to talk to you.


We are dedicated to helping people, not simply making sales. It is our pleasure to answer your questions.